Embest
 Low cost ARM Evaluation Boards

New products to receive literature  fill in request
 

These Embest ARM Evaluation Boards can of course be used with any ARM development system.  If you have not already chosen a JTAG interface and compiler then for a very cost effective solution you should consider the Embest JTAG interface, ARM IDE software based on the GCC compiler and Flash Programmer. They support a wide range of ARM7 and ARM9 cores from ATMEL, SAMSUNG, PHILIPS, CIRRUS, LINKUP, OKI, Sharp and ST Microelectronics.  

COMSOL holds a full range of Embest development tools and their most popular EVBs in stock for next day delivery via our web site.

Atmel ATEB40X Evaluation board

The Embest ATEB40x Evaluation Board enables real-time code development and evaluation for the AT91R40008 ARM family. It supports the AT91x40 series with its various memory options. The Embest ATEB40x Evaluation Board comprises a mother board and a daughter board. The daughter board is a microcontroller core board, it can be either an AT91R40008 daughter board, with 256K Bytes of On-chip SRAM or an AT91FR40162 daughter board, with 256K Bytes of On-chip SRAM and 1024K Words 16-bit Flash Memory.

Evaluation Board based on AT91x40 series

5.0V DC-only power supply

Two serial ports

Reset push button

Four user-defined push buttons

Eight LEDs

256Kb 16-bit SRAM (upgradeable to 512K Bytes)

1Mb 16-bit Flash

512Kb of EEPROM with two-wire interface access (controlled by a software two wire interface)

16-pin LCD expansion connectors

20-pin JTAG interface connector 

Two types of ATEB40X CPU module board currently exist

1) an AT91M40800 daughter board, with 8K Bytes of On-chip SRAM

2) an AT91R40807 daughter board, with 136K Bytes of On-chip SRAM

3) an AT91R40008 daughter board, with 256K Bytes of On-chip SRAM

4) an AT91FR40162 daughter board, with 256K Bytes of On-chip SRAM and 1024K Words 16-bit Flash Memory

Software Examples

Embest Provide boot software and test software, Atmel at91 C library, uCos BSP and plenty of samples code.

Atmel SBC40008 Evaluation board

A Single Board Computer with the ARM7TDMI based AT91R40008 Microcontroller which provides Flash, SRAM, I²C, RS232 and all other peripheral functions extend through two CPU I/O Expansion Connectors. It fully supports UcosII and Vxworks OSs.

The CPU on the Embest SBC40008 is the AT91R40008 from Atmel. Running at 66MHz with 256Kbytes of on-chip SRAM with a range of peripherals including an External Bus Interface, a 3-channel Timer/Counter, 2 UARTs, a Watchdog Timer and advanced power-saving features.

The Embest SBC40008 Fully supports Ucos II and Vxworks operating systems. Full test software is provided with the board.

Processor: AT91R40008 with integrated 256Kbytes on-chip SRAM running at 66MHz
Power input:+5.0V with power status indicator
Serial EEPROM (AT74C32/64/128/256/512)
2 x 512KB 8-bit Flash, 2 x 512KB 8-bit SRAM
Reset button and two buttons for Irq and Fiq
Two Status LEDs
Two 1.25mm 2 x 35-pin connectors for CPU I/O expansion (two RS232 serial ports, JTAG interface,
Power is available via the connectors

Software Examples

Source of test routines, circuit schematic, BOM, users manual and PSU

Atmel ATEB9200 Evaluation Board

A Complete Evaluation Kit based on Atmel’s 16/32-bit AT91RM9200 ARM Microcontroller. It includes a USB Host/Device interface, Ethernet, IrDA, SD/MMC, CF, SM, RS232 and RS485 interfaces as well as a complete Linux development system. Atmel’s AT91RM9200 is built around the 180 MHz 200 MIPS ARM Thumb processor with integrated 16K-byte instruction and 16K-byte data memories. The board features an enhanced ARM architecture 4v MMU and supports various memories including SDRAM, Static Memory, Burst Flash, CompactFlash, SmartMedia and NAND Flash integrated with a wide range of standard interfaces containing serial interfaces, Ethernet MAC interface, USB2.0 Full Speed Host and Device ports, I2S, I²C and SPI. It includes many debug features - JTAG-ICE, a dedicate UART debug channel (DBGU) and an embedded runtime trace ETM (Embedded Trace Macrocell). The board itself is provided with many example programs and is a complete Linux development environment. Embest provides many source code examples for this ATEB9200 evaluation board and all its peripheral options.   Hardware specification Processor: AT91RM9200 running at 180MHz Power input: DC 5.0V 2MByte parallel flash memory 32MByte SDRAM (optionally supports 64M) 8MBytes data flash 2 USB Host Ports and one USB Device Port 2 serial ports with one simple interface and one full MODEM connection IrDA interface RS485 interface SPI interface could connect CAN module EEPROM connected to the Two-wire Interface (TWI) 10/100M Ethernet interface AC97 module SD/MMC interface CF interface SM interface I/O ports all extended via sockets Embedded Trace Microcell (ETM) interface 20pin standard JTAG interface
		Now available as a low price Embest Kit containing....   This evaluation board,   UNetICE JTAG interface   Single seat  IDE, GCC Compiler,                   Debugger & Programmer For cost see the web shop

Also contains:

Source code software examples, documents (user manual, circuit schematic drawing, Datasheet, footprint), Embest products references, related development tools, ATMEL related material (the materials from Atmel CD-ROM) , Linux source code, compiled Linux kernel and file system, Uboot source code and compiled Uboot kernel

Atmel ATEBSAM7S Evaluation Board

This provides a complete evaluation kit for Atmel AT91SAM7S64 ARM Core. All HW interfaces of the AT91SAM7S64 are available and many software examples are provided, all in source code. The 32-bit AT91SAM7S64 is based on a 1.8V ARM7TDMI core operating at up to 55 MHz. It features an integrated 64K byte flash and a 16K byte high-speed on-chip SRAM and is an ideal migration path for 8-bit microcontroller users looking for additional performance and extended memory. Flash Encryption techniques can protect the firmware from accidental overwrite and preserves its confidentiality. With a wide range of peripherals including ADC, USART, USB, SPI, TWI, PWM and 32 GPIO this board has many uses. The Embest ATEBSAM7S™ Evaluation Board expands all functions of the AT91SAM7S64 microcontroller, and supports additional peripheral hardware including an 8-segment LED, a push-button interface, buzzer and ADC.   Hardware specification Processor: AT91SAM7S64 with integral 64Kbyte FLASH and a 16Kbyte high-speed on-chip SRAM Power input:+5.0V USB Device Port RS232 serial port Serial-port debugging interface (DBGU) TWI bus (Two-wire interface bus which is connected to an EEPROM chip AT24C02) SPI interface with a 8 segment display 1 PWM interface with an attached buzzer 1 ADC controller I/O ports are all extended A reset button and 4 user’s input buttons LCD interface (optional to connect character LCD) 20pin standard JTAG interface Also contains: Source code software examples, user manual and circuit schematic drawing

Now available as a low price Embest Kit containing....   This evaluation board,   UNetICE JTAG interface   Single seat  IDE, GCC Compiler,                   Debugger & Programmer For cost see the web shop