All-100G Universal Gang Programmer

The All-100G is Versatile

The All-100G can program up to 8 EPROM, EEPROM, FLASH, microcontrollers, Serial PROM and other device types. Based on the All-100 gang modules are available to hold 4, 6 or 8 devices and when you change part you only have to change the module, not the whole programmer. Support is provided for all of the latest package styles including DIP, PLCC, SOP/SOIC, TSOP, SSOP, QFP, TQFP, MQFP, BGA and others.

For a list of the devices supported by the All-100G select this link - to return use the BACK button on your browser.

A high speed USB port connects the programmer to any desktop or laptop PC running Windows 95/98NT/2K/XP. The software interface is a native Windows application. For higher throughput you can connect up to 8 units to a single PC.

The All-100G is reliable

We have over 12 years of experience designing gang programming systems for production environments. We have an installed bas of over 20,000 gang programmers world-wide in use at some of the largest and most respected companies in the computer and embedded systems industry. Close relations with all major IC manufacturers keep our engineers well informed of all of the latest programming algorithm releases. Our company's programming algorithms have been tested and approved by leading IC manufacturers worldwide.

Our dedicated high speed CPU and our new surface mount SIMM module pin driver circuits combine to provide extremely accurate programming waveforms, high speed, high reliability, and a compact form factor compared to traditional gang programmers. The All-100G pin drivers are fully programmable to support programming and testing of standard and low voltage devices. Built in protection circuits guard against over current and reverse insertion errors. The All-100G meets CE requirements and every All-100G is backed by a 1 year hardware warranty.

All-100G is fast

• Up to 8 28F010 FLASH can be programmed in just 15 seconds
• Up to 8 28F020 FLASH can be programmed in under 30 seconds using a All-100G

All-100G is easy to operate

The All-100G's Windows interface makes programming simple. Choose a device manufacturer and device type from a menu. Read in a file from a master device or load a file from the PC. Click on the "Blank Check" button to check if the device is blank, click the "Program" button to program the device, or click the "Auto" button to use the Auto function. The Auto functions displays all available functions to perform on the device (i.e. blank check, program, verify, program security, protect/unprotect sectors, etc...) Simply check off the operations you want to perform. After all desired operations are selected the programmer can be operated by a single external key on the programmer to initiate the operations. LED's next to each socket indicate that all operations were performed OK on the given device.

Maximise your investment

The All-100G is not just a dedicated EPROM/FLASH programmer. It can be expanded to support many devices by using our interchangeable modules.

Modules are also available for most memories, and micros  call for latest parts list.

For a list of the devices supported by the All-100G select this link - to return use the BACK button on your browser.