|Computer Solutions Ltd|
Celebrating 38 years
|Home Products Supported Chips Information Zone Contact Site Map Web Shop|
CAN Cables, Connectors, Converters
|CAN Connection Cable 2.0 m,
9-pin Sub-D female plug on both ends, each terminated with an
120 Ohm resistor. (so only suitable for connecting a single
node to an interface at high speed)
CAN Connection Cable 2.0 m, 9-pin Sub-D female plug on both ends, without terminating resistors.
|T-Adapter for tapping into CAN networks, 9-pin Sub-D female plug to 9-pin Sub-D female and 9-pin Sub-D male, without terminating resistors.|
|Converts the 9-pin Sub-D socket (to CiA DS102-1) to the OBD-2
– assigned for CAN only - Pin 6: CAN high, Pin 14:
CAN low (J-2284)
|CAN Termination Adapter, 9-pin Sub-D
male plug, terminated with a 120 Ohm resistor.
|The PCAN-Optoadaptor provides a galvanic separation on a CAN-bus system of up to 500V. It is enclosed in a small 9-pole to 9-pole housing.|
Please note that the following adapters / converters only change the signals to match the voltage/current requirements of the different standards you will still have to run both sides at the lower of the two speeds.
TJA1054 Converts interfaces with buffers capable of running high speed CAN to the low speed, low power TJA 1054 standard with PCA82C252, TJA1053 or TJA1054 transceivers. The TJA1054 Low Speed transceiver always runs in normal operating mode. It cannot be switched to Sleep mode or Standby mode.
AU5790 Converts interfaces with buffers capable of running high speed CAN to connect with systems using the AU5790 transceiver.
The PCAN-B10011S bus converter links a high-speed CAN-node and a truck trailer CAN bus
(ISO 11992-1)Specification. It provides direct connection to a 9-pin HS-CAN,
switch able termination of the HS-CAN. Connection of the Truck Trailer CAN via 9-pin Sub-D connector
with a choice of operating modes for the Truck Trailer CAN via a slide switch
For details of our software FMS Toolkit used to read or simulate an FMS system follow this link.
For more Information on :-
|CAN interfaces||USB, PCI, PC104, PC, PCMCIA, Express, Parallel port, ISA, RS232, LIN|
|Free PEAK CAN Software||The PCAN-Basic DLL, a range of OS drivers and PCAN-View bus diagnostic package are all supplied free with all Peak interfaces.|
|PCAN-Explorer||A sophisticated CAN bus logging and diagnostic package for use with complex applications including GUI and J1939 support.|
|PEAK Data Acquisition Systems||A range of CAN Data Acquisition and logging Systems from simple logging to advanced GPRS mobile applications.|
|PCAN I/O Modules||CAN modules with configurable digital and analogue I/O.|
|CAN Accessories||CAN Diagnostics Unit, Bus Extenders, Routers and Optical links|
|Cables||Pre-built high performance CAN cables, converters and termination|
|Other PEAK Software||Software is available to support FMS, CAN simulation, CANOpen, Linux and an Event driven API for time critical multi-tasked operation,|
|CAN Tutorial||Our technical summary for those new to CAN|
|Home||Shop||Products||Supported Chips||Information Zone||Contact||Site Map|
|Computer Solutions Ltd
3 b Claremont Road, West Byfleet, Surrey KT14 6DY
|Telephone: +44 (0) 1932 355630|
|Email: email@example.com||Web: https://www.computer-solutions.co.uk|
|Copyright © 2018 Computer Solutions Ltd|