Computer Solutions Ltd
Whats New | Advanced Search
Downloads | Exchange Rates

Celebrating 38 years
supplying all your CAN and Embedded Development Tool needs


Low-cost HCS08/HCS12 debugging tool
is powerful and versatile

Cyclone Pro

The new Cyclone Pro from Computer Solutions is a low-cost but powerful debugging tool that supports development on four different processor families: the 68HC08, 68HCS08, 68HC12 and 68HCS12.

This highly versatile unit will connect to a PC via serial port, USB or Ethernet interfaces, and will operate as a BDM or MON08 debugger or as a stand-alone programmer. Key features include automatic baud-rate and frequency detection of the target, compatibility with 2-5 V targets, initialisation of MON08 configuration on reset, and Windows or automated programming. Control of power sequencing of the target helps to manage security access when flash memories are being programmed.

The Cyclone Pro can be used in four different modes. First, with Windows-based assemblers, source-level debuggers (assembler and C) and a flash programmer, it can be used to debug code by providing access to the registers and memory, as well as having the ability to set breakpoints and run the CPU at full speed, slowly or in single-step mode.

Secondly, support for the Cyclone Pro is being provided by a number of leading C compiler manufacturers within their C debugging environments.

Thirdly, the CPROG software package, included with the Cyclone Pro, will allow completely automated programming of the target system. It operates according to a user- defined sequence, and returns 'success' or an error code when called from another application or batch file.

Fourthly, the unit can be linked to a PC for downloading a target program and then disconnected. It then becomes a stand-alone BDM-based flash programmer for on-chip memory or, in the case of the HC12/S12, for on- or off-chip memory.

Computer Solutions can also supply full development kits containing software, development board, interfaces and cables for the HC08, HCS08, HC12 and HCS12.

-  ends  -


Computer Solutions Ltd is the UK's premier supplier of microprocessor development tools. It supplies a wide range of software and hardware tools that support over 100 different microprocessor families. Hardware products include; In Circuit Emulators, EPROM Emulators and Device Programmers. Software tools include; Assemblers, Debuggers, Compilers, Real time executives, TCP/IP stacks and other high level protocol libraries. 

With 24 years' experience, Computer Solutions Ltd has unrivalled expertise in embedded tools, consultancy and support.

For further colour photographs, graphics, technical or marketing information,

            Contact: Chris Stephens, MD, Computer Solutions Ltd
            Tel: 01932 355630

Press releases are available by email if you wish - send your request to

For more information on the Cyclone Pro:

            Cyclone Pro          P&E's Web Site

Home Shop Products Supported Chips Information Zone Contact Site Map
Computer Solutions Ltd
3 b Claremont Road,   West Byfleet,  Surrey  KT14 6DY
Telephone: +44 (0) 1932 355630    
Email:      Web:
Copyright 2018 Computer Solutions Ltd